Skip to content
Basis Desk
DeFi · 7 min read Last reviewed November 22, 2026

Gasless Crypto Swaps, Explained: How Relayers Pay Fees

Gasless crypto swaps let users trade tokens without holding native network assets like ETH or SOL. By combining off-chain signatures, standardized message formats, and third-party relayers, decentralized protocols absorb or deduct transaction costs directly from token balances.

Editorial oversight: Julian Mercer, Chief Editor
Neutral
Gasless Crypto Swaps, Explained: How Relayers Pay Fees

Key points

  • Gasless swaps allow trades without holding native gas tokens like ETH or SOL by shifting on-chain submission to third-party relayers.
  • Users authorize trades and fee deductions via off-chain cryptographic signatures adhering to standards like EIP-712 and EIP-2612.
  • Relayers pay native blockchain gas fees upfront to validators and are reimbursed in the traded token directly through the settlement contract.
  • Gasless trades are not free; execution costs and relayer margins are deducted directly from the transacted asset balance.

Gasless crypto swaps allow traders to exchange digital assets on a blockchain without holding the network's native currency to pay execution fees. Instead of broadcasting an on-chain transaction directly, the user signs a cryptographically verifiable message authorizing the trade and fee deduction. A third-party operator, known as a relayer, submits the transaction to the network, pays the required base gas fee in native currency, and recovers costs directly from the transferred tokens.

This mechanism eliminates one of the most persistent hurdles in decentralized finance: the stranded-balance dilemma, where a wallet holds liquid assets like $USDC but cannot move them due to a lack of $ETH or $SOL.

The Architecture of Native Gas Fees

Public blockchains like Ethereum and Solana require computational resources to validate state changes. Validators or miners prioritize transactions based on fee payments made in the network's native reserve asset, such as ETH or SOL. Under the standard execution model, any account calling a smart contract must hold a balance of this native token. If an account holds thousands of dollars in stablecoins but zero native gas tokens, network nodes will reject its transactions before execution.

This rule stems from fundamental protocol security. Block producers need immediate programmatic compensation to protect against denial-of-service spam. However, this native fee requirement imposes heavy operational friction on users who bridge assets to secondary blockchains, receive merchant settlements in stablecoins, or create fresh self-custody wallets. Gasless swaps solve this structural friction not by eliminating network fees entirely, but by unbundling transaction origination from transaction submission.

Off-Chain Signatures and Intent Frameworks

Gasless trading relies on cryptographic signing standards that operate off-chain. Instead of invoking a smart contract method directly, a user's private key signs a structured data payload conforming to standards such as EIP-712 on EVM chains. This signature specifies unambiguous execution parameters: the asset sold, the minimum asset received, an expiration timestamp, a non-repeating sequence number called a nonce, and an allowable gas fee allowance.

Because generating a digital signature requires no network computation, signing costs nothing in gas. The resulting payload represents an intent—a signed declaration of a desired state transition rather than a direct execution pathway.

Once created, the user transmits this signature over standard internet protocols to a market maker, decentralized exchange aggregator, or specialized relayer. The recipient verifies that the cryptographic signature resolves to the user's public address and satisfies all specified pricing constraints.

The Relayer and Filler Model

The third party processing this payload acts as a relayer or solver. Relayers operate funded network nodes with substantial reserves of native gas assets. When a relayer receives a valid off-chain intent, it wraps the signature inside an on-chain transaction submitted from its own blockchain address.

The relayer pays the native network gas fee to the validator pool. In exchange, the underlying settlement contract executes two operations simultaneously within a single atomic batch:

  1. It performs the swap between the specified token pairs.
  2. It deducts a predetermined quantity of the traded token from the settlement proceeds and routes it to the relayer's address.

If the market moves or liquidity disappears before the transaction settles, the smart contract reverts. In that scenario, the relayer absorbs the lost network gas fee, while the user's account balance remains completely untouched.

Permitting Approvals: EIP-2612 and Permit2

Historically, standard ERC-20 token swaps on Ethereum required two separate transactions: first, an on-chain approval granting a router permission to spend tokens, followed by the swap itself. To execute a gasless swap when starting with zero ETH, this initial approval must also be handled without an on-chain transaction from the user.

Two primary architectural solutions enable this:

Native EIP-2612 Permits

Tokens built with the EIP-2612 extension, such as native USDC, include an internal permit function. This function allows an external caller to register an allowance on behalf of an owner by presenting a signed EIP-712 message. The relayer submits the user's permit signature alongside the swap execution within a single bundle. The contract verifies the permit, credits the allowance, executes the transfer, and reimburses the relayer, all without the token holder ever submitting an on-chain approval.

Permit2 and Meta-Transaction Bundling

For legacy tokens that predate modern signature standards, protocols utilize centralized canonical allowance hubs such as Uniswap's Permit2, alongside ERC-4337 Account Abstraction frameworks. When a user holds zero ETH, relayers sponsor and bundle Permit2 authorization signatures directly through specialized execution contracts or paymasters.

By packaging the allowance assignment, token transfer, and swap execution into a single transaction submitted by the relayer, the relayer covers the immediate setup cost on-chain and recovers those native gas expenditures entirely from the user's trade proceeds.

Economics of a Gasless Swap: A Worked Example

To understand the cost mechanics, consider a scenario where a trader holds 1,000 $USDC on an EVM network but possesses zero $ETH. The trader wants to convert this balance into wrapped Bitcoin ($WBTC).

Assume the prevailing network gas price mandates an execution fee equal to 0.003 ETH, which equals $9.00 at an assumed ETH price of $3,000. The market exchange rate sets 1 WBTC at $90,000.

  1. The user signs an EIP-712 message approving the sale of 1,000 USDC with a maximum allowable slippage of 0.5% and a relayer gas reimbursement fee capped at $12.00 in USDC.
  2. A relayer picks up the message, broadcasts the transaction to the network mempool, and pays the 0.003 ETH ($9.00) network gas cost from its own wallet.
  3. The settlement contract transfers 1,000 USDC from the user's account. It allocates $10.00 in USDC directly to the relayer (covering the $9.00 gas cost plus a $1.00 execution margin).
  4. The remaining 990 USDC routes through liquidity pools to acquire WBTC.
  5. At a rate of 1 WBTC per 90,000 USDC, 990 USDC buys 0.011 WBTC.
  6. The contract deposits 0.011 WBTC into the user's wallet.

The user successfully acquired WBTC and settled all execution costs without funding their wallet with ETH beforehand. The operational cost was transparently absorbed from the asset being traded.

Regulatory and Tax Implications

Gasless swap mechanics create specific accounting nuances under prevailing tax frameworks in the US, UK, and Europe.

In the United States, the Internal Revenue Service (IRS) treats cryptocurrency dispositions as taxable property transfers. When a gasless swap executes, the deduction of tokens to reimburse a relayer represents a separate transfer of property alongside the primary trade. Traders must calculate capital gains or losses not only on the full volume of sold tokens but also determine whether fee deductions are classified as transaction expenses that reduce gross proceeds or as distinct dispositions.

In the United Kingdom, HM Revenue & Customs (HMRC) provides specific rules regarding allowable costs for capital gains computations. Incidental costs of acquisition and disposal are typically deductible, but taxpayers must maintain exact records showing the broken-out fiat value of relayer deductions at the precise second of settlement.

Within the European Union, cross-border digital asset reporting under the Markets in Crypto-Assets (MiCA) framework and the European Commission's DAC8 directive increases regulatory scrutiny on wallet tracking and intermediary services. While off-chain order matching does not inherently alter the legal classification of an underlying token, institutional participants must monitor how execution venues classify relayer infrastructure to maintain anti-money laundering and reporting compliance. The compliance environment remains subject to ongoing administrative refinement across all these jurisdictions.

Common Misconceptions

Gasless Swaps Make Trading Free

Gasless swaps are not costless swaps. The term "gasless" strictly describes the user's local balance requirements, not the economic reality of the transaction. Validators still demand payment to alter blockchain state. The relayer pays this native cost upfront and charges the user a compensatory amount in the asset being traded, often adding a premium to offset market volatility and execution risk.

Any Token Can Be Swapped Without ETH Automatically

Not all assets support standalone off-chain signatures. If a token lacks native EIP-2612 permit capabilities, interacting with it for the first time historically required an on-chain approval transaction funded by native gas. Achieving zero-gas trading on non-permit assets requires advanced smart contract wallets, ERC-4337 paymasters, or specialized relayers willing to sponsor bundled initialization transactions.

Relayers Can Steal Your Funds

Relayers cannot unilaterally reallocate user balances. A relayer operates strictly within the mathematical boundaries defined by the user's cryptographic signature. If a relayer alters the trade destination, increases the fee beyond the signed maximum, or attempts to drain funds outside the specified contract scope, the underlying blockchain smart contract will invalidate the signature and revert the transaction.

How This Connects to the Market

Gasless swap infrastructure represents a key evolution in non-custodial user experience, narrowing the usability gap between centralized exchanges and decentralized protocols. Centralized platforms have long allowed users to trade any asset without holding the underlying chain's base fee token; intent-based decentralized execution brings that same parity on-chain.

This infrastructure also underpins the expansion of cross-chain liquidity and autonomous software agents. When automated systems or non-technical retail users can interact with multi-chain decentralized finance protocols without managing distinct balances of ETH, SOL, or AVAX across dozens of disparate ecosystems, network fragmentation declines. As protocol teams continue adopting account abstraction and unified intent clearinghouses, market liquidity increasingly concentrates around computational solvers and professional relayers equipped to handle balance-sheet gas underwriting on a global scale.

Questions this story raises

Can a relayer change my trade parameters or steal my funds?
No. Relayers can only execute trades that exactly match the cryptographic signature generated by your wallet. Any attempt by a relayer to alter the slippage, destination address, or fee cap will invalidate the signature, causing the smart contract to revert.
Why do some tokens require native gas while others do not?
Tokens that implement modern standards like EIP-2612 include built-in signature permit functions. Legacy tokens require initial on-chain approvals unless bundled through account abstraction frameworks, Permit2 contracts, or relayers willing to sponsor the initialization.
Are gasless swaps cheaper than standard swaps?
Not necessarily. While they eliminate the need to buy and bridge native gas tokens, relayers typically charge a small premium on top of actual network gas costs to protect against price volatility and execution failures.
Do gasless swaps eliminate front-running and MEV?
Many intent-based gasless protocols route orders privately among professional solvers rather than public mempools, which can significantly reduce exposure to common front-running and sandwich attacks.

References

  1. [1] ERC-4337: Account Abstraction Using Alt Mempool — Ethereum Improvement Proposals
  2. [2] EIP-712: Typed Structured Data Hashing and Signing — Ethereum Improvement Proposals
  3. [3] EIP-2612: Permit Extension for ERC-20 Signed Approvals — Ethereum Improvement Proposals
  4. [4] Permit2 Integration Documentation — Uniswap Labs

Evergreen explainer written by Basis Desk's system and checked by an independent model pass for factual errors and advice language. Figures, fees and rules change — the references above are where to verify current specifics. Market figures marked "at the time of writing" come from live exchange data. Report an error: corrections@basisdesk.news · corrections policy.

The Daily Brief, in your inbox at 07:00 ET

Five stories, the numbers that moved, what to watch. Three minutes. No hype, no advice, unsubscribe in one click.

Not financial advice. Basis Desk publishes information, not recommendations. Crypto assets are volatile and you can lose what you invest.